Released Version Details
3/9/2024 7.2.3.127 Firmware download integrity checks. Remote updates more robust with new failsafes introduced.
Display dimming reduced.
Repeaters rebalance at 7:30am, lineAmps rebalance at 7:00am (local time). 3 day reboot happens at 3am.
16/3/2024 7.3.2.103 PortSense feature added. Auto check all cables and connectors. Titan only.
signal reporting to allow StellaControl to display 4-LED and 6-LED indicators
Alerts now get plotted on the device history immediatly when they occur (before there was up to a 10 min delay)
Turn on/off Port Sense LEDs remotely. Titan only.
Rebal and Reboot synced to 3am, local time. fixed bug
Perform SHA256 checksum validation of downloaded firmware before passing to bootloader.
Blue uplink LED on LCD changed to a Square
Rebalance at 0700, Reboot at 0300 (local time)
Single LED status for LED Titans. Flashing means “trying to connect” , solid means “connected to platform”
10/12/2023 7.3.1.x PortSense feature added. Auto check all cables and connectors.
Telit embedded modem autoconnect.
Feedback detection further enhanced.(uplink feedback now much more robust)
New simple LED bank added(No need for LCD on iR4-T)
False uplink oscillations fixed.
Continous uplink alert now more reliable.
25/8/2023 7.2.3.117 4 new metrics, Peak AGC, Peak Fast UL AGC, Peak uplink power, Peak downlink power.
Automatic shutdown (ASD) boolean variable added to message to more easily distinguish when this event occurs in the device history.
For Repeaters only, “Near Shutdown” status message now only shows when AGC >=20dB. We recommend adding 6dB manual attenuation when you see the “Near Shutdown” status message. Other wise, no need to add manual attenuation.
This will mean that installers will very rarely need to add manual attenuation anymore for V9 iRepeaters.
False uplink oscillations fixed.
Continous uplink alert now more reliable.
Rebal and Reboot synced to 12 midnight , local time. fixed bug
25/6/2023 7.2.3.18 Binary Difference messaging implemented. Very small message size. (40 BYTES per message)
Smart attenuation improved.
Max hold on LEDs to smoothen them out (slow decay). Max hold for UL and DL sent to platform.
New info message warnings on main LCD screen, popup on user touch of little (i).
BAND_ENABLE remotely enable / disable bands.
When 6th green LED power turns on, we are at maximum power, with just a little AGC occurring.
Feedback detection added to DL. More reliable.
14/4/2023 7.2.1.11 Improve display startup sequence.
5/11/2022 7.2.1.8 Reinstate missing fan control
Band UL percentage improved. Average over last X minutes, where X = message frequency. Status bar improved with new status message and colors.
Uplink duty-cycle reporting fix
Subtle upgrade indicator; DIFF message flag
iR4_v2 updated code, fix to agc code bug, OCS_COUNTDOWN = 10 seconds., installer code on concole removed on startup.
4/12/2022 7.2.0.70 SW counter now working. The WDT is now counting up properly.
LCD 180DEG bug fixed. Restore FW button removed, band-plan chaged removed for all excvept DEV, persisten icons in menu fixed.
GPS report bug fixed. Random crash happening bug due to GPS fixed. Issue with temperature variable saving to eeprom fixed.
Binary Message implemented.
13/4/2022 7.1.1.63 Removed clamp from CombinerAmps. We add oscillation tokens but not extra clamp attenuation.
4xTap bottom left of main screen rotates LCD. No rebalance for Combiners
Show group atten to Installer and up.
Slower AGC attenation release on Combiners